GC868
Version
3
2
2
Registered Product Information
Manufacturer:
General Electric
Product Name:
GC868
Product Description:
Ultrasonic Clamp On Flowmeter
Protocol:
FOUNDATION Fieldbus
Category:
Flow,Ultrasonic
Profile:
FOUNDATION Field Device
Date:
7/5/2020
More Information:
The DigitalFlow GC868 flowmeter can be used to measure the flow of any
gas. It is especially useful for metering erosive, corrosive, toxic,
high-purity or sterile gases, or in any application where penetrating the
pipe wall is undesirable. Since no tapping or cutting of the pipe is
required, permanent installation costs are significantly reduced. The
meter has no wetted or moving parts, rarely requires maintenance, causes
no pressure drop and has very wide rangeability. The new meter was
tested extensively on metal tubes with diameters as small as 0.75 in (20
mm) and pipes as large as 24 in (600 mm). Suitable applications for this
meter include flow measurements of air, hydrogen, natural gas, steam and
many other gases. Using patented Correlation Transit-Time detection
techniques, demonstrated accuracy is superb at better than ±2 percent of
reading with ±0.5 percent repeatability
Registered Product Details
Manufacturer ID (hex):
004745
Device Type ID (hex):
0002
DEV_REV (hex):
03
DD Revision:
0x01(DD4), 0x01(DD5)
FOUNDATION Physical Layer Profile:
113
Stack Manufacturer:
Fieldbus Inc, (National Instruments)
FOUNDATION Stack Class:
31PS
Stack Version:
3.1.0
Registered Blocks:
1-RB2(e), 6-AI(e), 1-PID(e)
Other Blocks:
2-TB(c)
Registered Features:
Alarms and Events
Function Block Linking
Trending
Multi-bit Alert Reporting
Field Diagnostics
Registration Information
Registration Authority:
FieldComm Group
Registration Status:
Registered
Tester Version:
6.4.0
DD/CFF Tester Version:
6.4.0
Contact Information
E-mail:
randy.pfenninger@ge.com
Website:
http://www.ge-mcs.com
Device Support File Usage
FieldComm Group (FCG) makes available to its members and to the public certain device driver (DD) files, in various forms, that have passed certain tests conducted by or through FCG. The DD files are, or are created from, submissions to FCG by FCG members and are provided by FCG AS IS. FCG disclaims all liability for the accuracy, suitability or use of the DD files. Each member creating DD files has its own policies regarding supporting use of those files, and may, for instance support use of DD object code files, but not DeviceInfo or other files. While FCG is under no obligation to provide support for use of any DD files, FCG welcomes all inquiries on the subject and will often be able to assist.